10" x 54" SHARP MODEL TMV/FC-3 3-AXIS CNC KNEE MILL
Year
Not provided
Stock #
14563
Condition
Used
Keep Scrolling To Learn More
Specifications
Equipped With
NEW 10" x 54" SHARP MODEL TMV/FC-3 3-AXIS CNC KNEE MILL
Fagor CNC System w/Software and Hardware Features
10.4” color monitor; 512 MB compact flash, 1 MB RAM, conversational and G-code programming with teach-in mode. On-bard profile editor for easy blue print programming, including complex profiles( mini CAD/CAM), 3 D contouring capabilities
Communication includes RS-232, DNC, USB and Ethernet card ( option)
Handheld Manual Pulse Generator ( option )
- Digital Servo Drive System (3 aves)
- Precision Ground Ballscrews
- 3-AxesDRO (table, saddle, quill)
- Self-Lubricating Motor Shaft
- Precision Ground Gibs
- ABEC-7 Super Precision Spindle Bearing
- Roller Bearing Support Lower Portion of Motor Shaft
- Hard Chromed Variable Drive Pulley
- One-Piece Meehanite Casting
- Cross Way Cover
- Dual Cooling Fan
| Working surface | 10” x 54” |
| T-slot number, size | 3, 5/8” |
| Capacity | |
| Table travel; x-axis | 28” |
| Saddle travel; y-axis | 15.5” |
| Ram travel | 18.5” |
| Quill travel; z-axis | 5” |
| Knee travel | 15.3” |
| Throat distance (min-max) | 9.8-28.3” |
| Spindle to table top | 1.6-16.9” |
| Spindle | |
| Motor | 3 HP |
| Wiring voltage | 220/440V, 3 phase, 60 H |
| Taper | R-8 |
| Speeed (vari speed) | 60-4,500 RPM |
| Quill feed (IPR) | 0.0015, 0.003, 0.005” |
| Accuracy | 0.0002” TIR |
| Head tilt; right-to-left (each way) | 90° |
| Head tilt; up-and-down (each way) | 45° |
| Dimensions and Weight | |
| Floor area (w x d) | 70” x 75” |
| Height | 88” |
| Net weight (approximately) | 3,700 lbs |
STANDARD EQUIPMENT:
- Harden and ground box-ways
- Manual Drawbar
- Front and rear way covers
- Automatic Lube System
- Tool Kit includes:
- Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint.
OPTIONAL ACCESSORIES:
- DVS Head wired 220V*
- DVS Head price based on 220V wiring (for 440V – Please see below)
- *440V Transformer – 3HP
- 6” “Kurt” Vise with Swivel Base
- Drill Arbor, order with 2531-6088
- Drill Chuck – Jacobs with Arbor (0-1/2”) R8
- Coolant System with Chip Pan At Base
- “Maxi-Torque Rite” Power Draw Bar
- “ Align” Power Draw Bar
- Factory Installation Charge – PDB, Each
- R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
- Clamping Kit (52 pcs/steel rack)
- Halogen Work light
- Fagor CNC Control Optional Items:
- SSpindle Interface: Start / forward / reverse control. RPM control.
- Coolant on/off interface
- 110 volt transformer
- Remote hand wheel (RPG/100P
- Ethernet network port.
- Upgrades: 2GB compact flash memory. 1M RAM memory. 8055i-PLUS faster CPU
- Digital Probe couture tracing system.
- Forth axes DRO feedback (for index table or knee).
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
