Equipped With

30" X 280" ACRA MODEL 30280FCH PRECISION GAP BED ENGINE LATHE

• Multi-Start threads indexing device.
• Forced lubrication system of Spindle is employed by a Pump.
• Drum type brake system for main motor connected to the pedal with a brake wire.
• Cross Slide is hardened and ground to prolong operational life.
• Spindle bore is 4-1/8″
• Spindle nose is D1-11
• Spindle is supported by three bearings.
• Rapid traverse for longitudinal
• Foot-operated braking system.
• Powerful and easy to operate Tailstock.
• Width bed is 560 mm (22.04”).
• Quill diameter is 100 mm(3.93”).
• Hardened and precisely ground.
• Tailstock body can easy to move by special design.


Specifications:
Capacity:                                                30″/42″ x 280″
Swing Over Bed:                                    30-11/16″
Swing Over Cross Slide:                         20-1/2″
Swing In Gap:                                         42-1/2″
Distance Between Centers:                    280″
Bed Width:                                             22"
Spindle Nose:                                         D1-11
Spindle Bore:                                          4-1/8″
Taper of Spindle:                                    MT NO.5
Spindle Speeds – Steps:                         16
Spindle Speeds – Range:                       12 ~ 1,200 RPM
Cross Slide Travel:                                  21-1/4″
Compound Slide Travel:                         8-5/8″
Inch Threads:                                          2 ~ 28 TPI
Metric Threads:                                       1 ~ 14 mm
Longitudinal Feeds:                                 0.0024″~0.0337″
Cross Feeds:                                            1/2 Half of Longitudinal Feeds
Tailstock:
     Quill Diameter:                                   3-13/16″
     Quill Travel:                                        11″
     Quill Taper:                                         MT NO.6
Spindle Drive Motor:                               20 HP x 4P
Voltage:                                                   220V/440V AC /3 PH
Weight                                                     24,810 lbs
Standard Equipment:
• Dead center MT#6
• Rapid traverse
• Coolant system
• Work light
• Tool box and Service kits
• Leveling screws and Foundation pads
• Multi-position length stop