Equipped With

40" X 160" ACRA MODEL 40160FCH PRECISION GAP BED ENGINE LATHE

• Multi-Start threads indexing device.
• Forced lubrication system of Spindle is employed by a Pump.
• Drum type brake system for main motor connected to the pedal with a brake wire.
• Cross Slide is hardened and ground to prolong operational life.
• Spindle bore is 4-1/8″
• Spindle nose is D1-11
• Spindle is supported by three bearings.
• Rapid traverse for longitudinal
• Foot-operated braking system.
• Powerful and easy to operate Tailstock.
• Width bed is 560 mm (22.04”).
• Quill diameter is 100 mm(3.93”).
• Hardened and precisely ground.
• Tailstock body can easy to move by special design.


Specifications:
Capacity:                                         40″/52″ x 160″
Swing Over Bed:                             40-3/16″
Swing Over Cross Slide:                 30-15/16″
Swing In Gap:                                 52-3/8″
Distance Between Centers:            160″
Bed Width:                                     22″
Spindle Nose:                                 D1-11
Spindle Bore:                                  4-1/8″
Taper of Spindle:                             MT NO.5
Spindle Speeds – Steps:                  16
Spindle Speeds – Range:                12 ~ 1,200 RPM
Cross Slide Travel:                           21-1/4″
Compound Slide Travel:                  8-5/8″
Inch Threads:                                   2 ~ 28 TPI
Metric Threads:                               1 ~ 14 mm
Longitudinal Feeds:                        0.0024″~0.0337″
Cross Feeds:                                    1/2 Half of Longitudinal Feeds
Tailstock:
     Quill Diameter:                          3-13/16″
     Quill Travel:                               11″
     Quill Taper:                                MT NO.6
Spindle Drive Motor:                      20 HP x 4P
Voltage:                                          220V/440V AC /3 PH
Weight                                           18,276 lbs

Standard Equipment:
• Dead Center MT#6
• Rapid Traverse
• Coolant System
• Work Light
• Tool box and Service kits
• Leveling screws and Foundation pads
• Multi-position length stop