Equipped With

65" X 280" ACRA MODEL 65280SHT PRECISION GAP BED HEAVY DUTY ENGINE LATHE

Gearbox:
• The gear box is entirely enclosed construction and provide a range of feedings or thread cuttings (inch, metric, module pitch and diametrical pitch).
• Inch and Metric threading without changing gears.
• Oil both lubrication and built in safety clutch safeguards the continuous and proper operation of the universal gear box.

Headstock:
• The spindle is supported by high precision bearings suitable for both heavy and precision cutting.
• The speeds of spindle have 12 steps and designed on theoretical base. All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground.
• Control of main drive through electromagnetic brake, and automatic forced lubrication.
• Spindle Bore size wide selections-153 mm( 6″ ), 230 mm( 9″ ), 255 mm(1 0″), 310 mm(12″), 355 mm(14″), 405 mm(16″), 530 mm(21″).

Carriage and Apron:
• The Compound Rest can be fixed on the cross-side anywhere, convenient for cutting work application.
• The Apron gives automatic lubrication and locked safety device protect threads and feeding.
• Rapid Traverse drive for longitudinal-cross feeding and forward & reverse feed are operates very light and convenient.
Taper Attachment:
• The Taper Attachment is designed to easily operate and rapidly cut taper in high accuracy; the device can produce ± 10 angles.
• Electric cable in steel cover to protect wire from chips and prevent trouble with electric wires.


Specifcations:
Capacity:                                                65″/86″ x 280″
Swing Over Bed:                                    65″
Swing Over Cross Slide:                         53″
Swing In Gap:                                         86″
Width of Gap:                                        22″
Distance Between Centers:                    280″
Bed Width:                                             33″
Spindle Nose:                                         A2-15
Spindle Bore:                                          6″
Taper of Spindle:                                    MT NO.6
Spindle Speeds – Range:                        3~300 RPM
Cross Slide Travel:                                   31-1/2″
Compound Slide Travel:                          16-1/2″
Rapid Travel Speed to Carriage:              80″/minute
Inch Threads:                                           1/4 ~ 30 TPI
Metric Threads:                                        1 ~ 120 mm
Module Threads:                                     0.25 ~ 30 mm
Diametrical Threads:                                1 ~ 120 D.P.
Longitudinal Feeds:                                 0.004″ ~ 0.40″/rev
Cross Feeds:                                            0.002″ ~ 0.20″/rev
Tailstock:
     Quill Diameter:                                    6″
     Quill Travel:                                         13-3/8″
     Quill Taper:                                          MT NO.6
Spindle Drive Motor:                                40 HP
Voltage:                                                    230V/460V AC /3 PH
Weight                                                     47,600 lbs

Standard Equipment:
Steady Rest
Electromagnetic Brake
4-Way Rapid Traverse
Center Sleeve
Center (M.T.6#)
Tool Post Wrench
Anchor Bolt
Tool Box & Tool
Coolant System
Halogen Light