NEW 12" x 24" SHARP SGE-1224-2NA 2-AXIS NC SURFACE GRINDER
Year
Not provided
Stock #
14622
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
NEW 12" x 24" SHARP SGE-1224-2NA 2-AXIS NC SURFACE GRINDER
- 5 HP/ 3.7 KW Spindle Motor
- Turcite Ways
- Bed Type Construction
- Double "V" Ways on Cross Travel
- One flat and one V way on Longitudinal Travel
- Ball screws and Servo Motors are used on both Downfeed and Cross travel
- Longitudinal movement is driven by high performance hydraulic system
- Linear guideways for precision downfeed
- Spindle speed is 1455 RPM
| Maximum Grinding (length x width) | 26” x 12" |
| Max. distance from table top to spindle center | 28” |
| Table | |
| Table Surface (W x L) | 12” x 24” |
| Maximum longitudinal travel | 28" (700mm) |
| Maximum cross travel | 14" (360mm) |
| T-slot (NO x width) | 3 x 0.67 (3 x 17) |
| Feed | |
| Hydraulic Feed | 984 ipm (0.1-25 M/min) |
| Cross Movement of saddle (NC) | |
| Feed rate range | 0.5-10 ipm (12.7-25.4 mm/min) |
| Auto feed range | 0.0001" - 0.4" (.0025-10.1 mm) |
| Rapid traverse feed rate | 10 ipm (254 mm/min) |
| Resolution of MPG | 0.0001" (0.0025mm) |
| Vertical Movement of wheelhead (NC) | |
| Feed rate range | 0.5-10 ipm (12.7-25.4 mm/min) |
| Auto feed range | 0.0001" - 0.4" (.0025-10.1 mm) |
| Rapid traverse feed rate | 10 ipm (254 mm/min) |
| Resolution of MPG | 0.0001" (0.0025mm) |
| Spindle & Wheel | |
| Spindle Motor | 5 HP/3.7 KW/4P |
| Spindle speed | 1455/1755 rpm |
| Grinding wheel outside diameter x thickness | 12 x 2 (305 x 50) |
| Grinding wheel bore | 5 (127) |
| Motor | |
| Hydraulic pump | 5 HP |
| Cross feed AC servo | 0.5 HP |
| Vertical feed ( AC servo) | 0.5 HP |
| Machine Size | |
| Dimensions | 128”x 99” x 83” |
| Weight (Approx) | 7040 lbs (3200 kg) |
Standard Equipment
- Grinding Wheel (dia. x thickness x bore) "12 x 2" x 5"/ 305 x 50 x 127 mm
- Grinding Wheel Adaptor & Puller
- Arbor for Wheel Balancing
- Diamond tool (1/4 carat) with Base
- Dust Sweeping Plate
- Working Lamp
- Leveling Plates x 4
- Leveling Bolts with Nuts x 4
- Eyebolt x 2
- T-Nut (#14) & Screws (M 10-40) x 2
- Tool Box and Tools
- Way lubrication oil
- Operation Manual and Inspection Certificate
- Spare Paint
Optional Accessories
- Permanent magnetic chuck
- Grinding wheel balancing apparatus
- Spare grinding wheel adaptor
- Dust suction system
- Coolant system
- Coolant & dust suction system for SGE-818-2NA
- Inverter
- Digital read out for cross vertical movement
- Radius dress device
- Angle dressing device
- Punch former for SGE-818-2NA
- Sine vise
- Tool maker vise
- Since plate with permanent magnetic chuck
- Demagnetizer (AC 110/220V, permanent magnetic chuck)
- Automatic demagnetizing controller (for electro-magnetic chuck)
- Electro-magnetic chuck
- Consistent temperature control for hydraulic system
- Optical-dresser with microscope (x10)
- Coolant system c/w a magnetic dust separator
- Coolant system with paper filter c/w a magnetic dust separator
- Overwheel parallel manual dresser with auto dressing amount compensated to vertical axis
- Optical radius angle dresser
- Dynamic balancer for grinding wheel
- Powered conditioning tools for diamond & CBN wheel
- Table mounted diamond roll dresser
- Diamond roll dresser mounted on wheel head
- Table mounted pop dresser with one of three diamond tools for profiling
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
