NEW SHARP SV-4328SX BOX WAY CNC VERTICAL MACHINING CENTER
Year
Not provided
Stock #
14638
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
NEW SHARP SV-4328SX BOX WAY CNC VERTICAL MACHINING CENTER
- 43.3" x 27.5" x 24 travel, machine weight over 15,000 lbs
- Induction hardened and ground box ways (X,Y,Z) for rigidity
- Meehanite cast iron is used on all structural components. Finite Element Analysis
- (FEA) is used to optimize the structure for rigidity.
- A wide saddle fully supports the worktable throughout the travel.
- Fanuc Oi-MD control
- Fanuc digital AC servo, motors and drives
- CAT-40 taper spindle with 10,000rpm/25 hp with chiller
- Double anchored, pre-tensioned and double nut ball screws
- 20 bars coolant through spindle preparation
| Box Way Vertical Machining Center | SV-4328SX |
| Travel Size (x, y, z) | 43.3" x 27.56" x 24" |
| Table Size | 51.2" x 25.6" |
| Maximum Table Load | 2200 lb. |
| Table T-Slot Size | 5" x 0.7" x 3.9" |
| Spindle Center to Column (throat) | 28.7" |
| Spindle Nose to Table Surface | 5.1" ~ 29.1" |
| Floor To Table | 33.5" |
| Spindle Speed (standard) | 12,000 rpm (Ceramic bearing) |
| Taper | CAT-40 |
| Spindle Motor | 20/25 HP |
| Cutting Feed Rate (all axes)(MAX) | 393 ipm |
| Rapid Traverse (x,y) | 945 ipm |
| Rapid Traverse (z) | 590 ipm |
| Ball Screw Diameter (X / Y, Z ) & Pitch | X/Y: 1.57/0.4 (inch) Z: 1.57/0.4 (inch) |
| Transmission | Direct Drive |
| Tool Capacity | 24 |
| Max. Tool Diameter | 2.99" |
| Without Adjacent Tool | 5.9" |
| Max. Tool Length | 11.8" |
| Max. Tool Weight | 15.4 lb. |
| Tool Change Time, tool to tool | 4.6 sec |
| Tool Change Time, chip to chip | 6 sec |
| FANUC systems, standard | Oi-MD |
| Positioning Accuracy | +/- 0.0002" |
| Repeatability Accuracy | +/- 0.0001" |
| General Power | 220V/ 3 phase/ 60Hz |
| Air Requirement (psi) | 6 CFM @ 88psi |
Dimensions and Weight |
|
| Machine Dimensions | 114" x 114" x 122" |
| Approximate Weight | 15,840 Ib. |
STANDARD ACCESSORIES:
- Fanuc Oi-MD control with 10.4" color LCD Screen
- Remote Jog Handle
- Fanuc Alpha Series Spindle Motor
- Spindle Chiller
- Separate Roll Out Coolant Tank
- Flood Coolant
- Large Side Doors
- Electrical Cabinet Heat Exchanger
- Automatic Lubrication System
- Fluorescent Work light
OPTIONAL ACCESSORIES:
- SV-4328 ST Productivity Package (includes Chip Conveyor, Chip Coolant Flush System, Coolant Gun and 4 Spare M Codes)
- Fanuc CNC Update Option (2MB Part Program Storage, Data Server with Ethernet, 1GB Flash Memory)
- Coolant Through the Spindle Pump Option
- Rotary Table Options, Tsudakoma 6" Indexer
- Rotary Table Options, Nikken 7" Rotary Table Package
- Rotary Table Options, Nikken 8" Rotary Table Package
- Options are Factory Installed
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
