NEW SHARP SV-5128ST BOX WAY CNC VERTICAL MACHINING CENTER

Type

Machining Centers, Vertical

Manufacturer

SHARP

Model

SV-5128ST

Year

Not provided

Stock #

14639

Condition

New

Request A Quote

Keep Scrolling To Learn More

NEW SHARP SV-5128ST BOX WAY CNC VERTICAL MACHINING CENTER

Specifications

Equipped With

NEW SHARP SV-5128ST BOX WAY CNC VERTICAL MACHINING CENTER

51.2" x 27.5" x 28” (1,300 x 700 x 710 mm ) travel, machine weight over 17,000 lbs (8,000 Kg )

Induction hardened and ground box ways (X,Y,Z) for rigidity

Meehanite cast iron is used on all structural components.

Finite Element Analysis (FEA) is used to optimize the structure for rigidity.

A wide saddle fully supports the worktable throughout the travel.

Fanuc Oi-MD control

Fanuc digital AC servo, motors and drives

CAT-40 taper spindle with 10,000 RPM, 25 HP motor with chiller

Double anchored, pre-tensioned and double nut ball screws

20 bars coolant through spindle prepped

Travel Size (X, Y, Z) 51.2" x 27.56" x 27.95" (1300 x 700 x 710 mm)

Table Size 59" x 25.6" (1500 x 650 mm)

Maximum Table Load 2200 lb. (1,000 Kg)

Table T-Slot Size 5" x 0.7" x 3.9" ( 5 x 18 x 100 mm )

Spindle Center to Column (throat) 28.7" ( 730 mm )

Spindle Nose to Table Surface 5.1" ~ 33" (130-840mm)

Floor To Table 33.5" (850 mm)

Spindle Speed (rpm) 5128 ST - 10,000 rpm

Spindle Taper CAT-40

Spindle Motor 20/25 HP (15/18.5 kw)

Cutting Feed Rate (all axes)(MAX) 393 ipm (10,000 mm/min)

Rapid Traverse (x,y) 945 ipm (24,000 mm/min)

Rapid Traverse (z) 590 ipm (15,000 mm/min)

Tool Capacity 24

Max. Tool Diameter 2.99" (76 mm)

Without Adjacent Tool 5.9" (150 mm)

Max. Tool Length 11.8" (300 mm)

Max. Tool Weight 15.4 lb. ( 7 Kg)

Tool Change Time, tool to tool 4.6 sec

Tool Change Time, chip to chip 6 sec

FANUC systems, standard Oi-MD

Positioning Accuracy +/- 0.0002" (+/- 0.005 mm)

Repeatability Accuracy +/- 0.0001" (+/- 0.003 mm)

General Power 220V/ 3 phase/ 60Hz

Air Requirement (psi) 6 CFM @ 88psi

Machine Dimensions 126" x 114" x 122", ( 2,900 x 2,900 x 3,100 mm)

Approximate Weight 17,600 Ib. (8.000 kg)

Approximate Weight 16,300 Lbs (7,400 Lg)

Attachments

There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Travel Size (X, Y, Z)	51.2" x 27.56" x 27.95" (1300 x 700 x 710 mm)
Table Size	59" x 25.6" (1500 x 650 mm)
Maximum Table Load	2200 lb. (1,000 Kg)
Table T-Slot Size	5" x 0.7" x 3.9" ( 5 x 18 x 100 mm )
Spindle Center to Column (throat)	28.7" ( 730 mm )
Spindle Nose to Table Surface	5.1" ~ 33" (130-840mm)
Floor To Table	33.5" (850 mm)
Spindle Speed (rpm)	5128 ST - 10,000 rpm
Spindle Taper	CAT-40
Spindle Motor	20/25 HP (15/18.5 kw)
Cutting Feed Rate (all axes)(MAX)	393 ipm (10,000 mm/min)
Rapid Traverse (x,y)	945 ipm (24,000 mm/min)
Rapid Traverse (z)	590 ipm (15,000 mm/min)
Tool Capacity	24
Max. Tool Diameter	2.99" (76 mm)
Without Adjacent Tool	5.9" (150 mm)
Max. Tool Length	11.8" (300 mm)
Max. Tool Weight	15.4 lb. ( 7 Kg)
Tool Change Time, tool to tool	4.6 sec
Tool Change Time, chip to chip	6 sec
FANUC systems, standard	Oi-MD
Positioning Accuracy	+/- 0.0002" (+/- 0.005 mm)
Repeatability Accuracy	+/- 0.0001" (+/- 0.003 mm)
General Power	220V/ 3 phase/ 60Hz
Air Requirement (psi)	6 CFM @ 88psi
Machine Dimensions	126" x 114" x 122", ( 2,900 x 2,900 x 3,100 mm)
Approximate Weight	17,600 Ib. (8.000 kg)
Approximate Weight	16,300 Lbs (7,400 Lg)

NEW SHARP SV-5128ST BOX WAY CNC VERTICAL MACHINING CENTER

Specifications

Equipped With

Attachments

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.