NEW SHARP SVL-2416SE-F LINEAR WAY CNC VERTICAL MACHINING CENTER
Year
Not provided
Stock #
14644
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
NEW SHARP SVL-2416SE-F LINEAR WAY CNC VERTICAL MACHINING CENTER
- 24” x 16” x 18” travel
- Linear way construction
- 1890 in/min (48M/min) rapid traverse
- 10,000 rpm, BIG PLUS CAT 40 spindle
- 16 tools carousel type ATC
- Fanuc Oi-mate-MD control
- Small footprint
| Work Capacity | |
| Travel X,Y,Z | 24" x 16" x 18.1" |
| Spindle Nose to Table | 7.9 - 23.6 |
| Spindle Center to Column | 17 |
| Work Table | |
| Table Area | 27.5" x 16.5" |
| Spindle | |
| Spindle Taper | CAT 40 |
| Spindle Max. Speed | 10,000 rpm |
| Driving Type | Belt Drive |
| Motor (30m/cont.) | 7.3/10 |
| Automatic Tool Changer (ATC) | |
| Magazine type | Carousel |
| Magazine Capacity | 10 |
| Tool Selection Type | Set Tool Number |
| Max. Tool Diameter | 3.9" |
| w/o adj. tool, max dia. | 5.9" |
| Max Tool Length | 9.8" |
| Max Tool Weight | 15.4 lbs |
| Air Blast at Tool Change | Standard |
| Motion | |
| Cutting Feed Rate | 0.04 - 393.7 ipm |
| Rapid Traverse | X/Y/Z: 1,890 ipm |
| Accuracy | |
| Positioning Accuracy | 0.00016/0.004 inch |
| Repeatability Accuracy | 0.00012/0.003 inch |
| CNC Control Features | |
| Controller | Fanuc |
| Control Model | Oi-MD |
| Programming Assist | Manual Guide |
| 4th Axis Support | Standard |
| Screen Size | 8.4 LCD |
| Coolant System | |
| Flood Coolant Nozzles | 2 |
| Coolant Tank Capacity | 42 gal. |
| Chip Pan | Standard |
| Power Requirement | |
| Electrical | 220V /3 Phase/20 KVA/60 Hz |
| Air | 6 CFM @ 88 psi |
| Machine Measurements | |
| Floor Space | W: 72.8", w/ side mount 78.2" D: 85" |
| Height | 91.5" |
| Door Opening | 25" |
| Weight | 7,260 lbs |
STANDARD ACCESSORIES
- Fanuc Oi-MD control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
- Full metal enclosure with 2 large side doors
- Coolant system with enlarged coolant tank
- Coolant gun
- Spindle Chiller
- Auto lubrication system
- Rigid tapping
- Air gun
- Removable electronic hand wheel (MPG)
- Door interlock
- Chip pan
- Air accumulator
- Heat exchanger for electric cabinet
- Florescent work light
OPTIONAL ACCESSORIES
- 4th axis kit prepped ( electrics, cables unit)
- 4th axis with rotary table (complete with drives, motor)
- Flat type chip conveyor
- Oil skimmer
- Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
- CTS 20 bar (300 psi) pump with tank
- Tool Probe (Renishaw TS27R)
- Tool Setter (Renishaw OMP40
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
